Rubber Tyre Processing Crusher tyre crusher makers
The EPT tire recycling EPT will be managed by the PLC, all the materials will be method inside of EPTs, there is Actual ZERO Pollution. one labor, 1 engineer can work all the EPTs, no require to work the EPTs, just control the PLC. the EPTs can defend the EPTs, operate the EPTs and keep the EPTs function easily.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automated control technique, with automated reversal control program in overload problem. Two-shaft tire crusher is EPTly developed for old tires with minimal speed and substantial torque to lessen noise and EPT intake.
The blade of the shredEPTis manufactured of substantial top quality steel and subjected to Bodycote warmth remedy to accomplish the very best crushing overall performance.The shredEPTis simple to disassemble and alter cutter blade and suited for tearing large, additional thick and tough resources.The thickness range of the crushing blade is 25mm-152mm according to the tire sort,output and last merchandise. The grinEPTcan method OTR tires,huge truck tires,vehicle tires and so on at the pace of 1-30tons whithin one hour.
|
Product |
Enter dimension |
Output dimension |
Cappacity |
Motor |
Blades amount |
Proportions |
Weight |
|
TS-800 |
800mm |
50*50mm |
one-2T/h |
2*22kw |
16pcs |
4*two.six*3.2m |
8T |
|
TS-1200 |
1200mm |
sixty*60mm |
three-5T/h |
2*37kw |
20pcs |
4.8*2.eight*3.5m |
14T |
|
TS-1600 |
1600mm |
50-150mm |
6-8T/h |
2*45kw |
sixteen-30pcs |
five*two*3.4m |
18T |
|
TS-1800 |
1800mm |
fifty-150mm |
seven-10T/h |
2*55kw |
twenty-24pcs |
five.6*two*three.4m |
23T |
|
TS-2000 |
2000mm |
75-200mm |
ten-15T/h |
2*75kw |
20-30pcs |
six*2.4*4m |
36T |
|
TS-2400 |
2400mm |
one hundred-200mm |
twenty-30T/h |
2*110kw |
16-24pcs |
7.4*three.two*5.2m |
56T |
two.Rasper
EPT tire shredding program is created to make up to six tons for each hour of wire free of charge rubber mulch.This technique makes up to a 99% wire free of charge chip ranging in dimensions among 12-25mm relying on the wanted measurement.After processing,the steel is eliminated by our magnetic separation method.At this position,the wire free of charge rubber chips are prepared to be coloured and utilized for landscaping mulch and the metal is completely ready to be baled and marketed to smelters.
|
Rasper |
Motor |
EPT |
Ability |
Dimensions |
Fat |
Reducing chamber |
Last item |
|
R45 |
Siemens |
45KW |
300-500kg/H |
one.four*one.2*2.3m |
1700kg |
450*600mm |
ten-30mm |
|
R55 |
Siemens |
55KW |
500-700kg/H |
1.seven*1.seven*two.3m |
1850kg |
450*800mm |
ten-30mm |
|
R75 |
Siemens |
75KW |
seven-hundred-1T/H |
2*two*4.1m |
3500kg |
550*800mm |
10-30mm |
|
R90 |
Siemens |
90KW |
one-one.5T/H |
2.1*2.1*four.1m |
4200kg |
550*1000mm |
10-30mm |
|
R132 |
Siemens |
132KW |
1.five-3T/H |
two*2.five*four.1m |
6100kg |
742*1200mm |
10-30mm |
|
R315 |
Siemens |
315KW |
three-6T/H |
6.two*two.1*3.6m |
12400kg |
697*1562mm |
ten-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Producing EPT is adopting actual physical recycling method and is made to grind the rubber mulch from the rasper into modest granules as wonderful as one-6mm. The granules are screened and re-circulated until the sought after size is achieved. This Totally-Automatic Tyre Recycling Line working in regular temperature, no need to have to insert any other chemical compounds, no air pollution to the setting. This is the ideal way to recycling scrap tires.
|
Granulator |
G37 |
G45 |
G90 |
|
Motor |
Siemens |
Siemens |
Siemens |
|
EPT |
37kw |
45kw |
90kw |
|
Capacity |
300-500kg/h |
five hundred-800kg/h |
800-1500kg/h |
|
Dimensions |
1.eight*1.six*two.4m |
1.8*1.nine*2.4m |
2.two*two.three*3m |
|
Ultimate item |
one-6mm |
one-6mm |
1-6mm |
4.Miller
Rubber powEPTis the last end result of ambient tire recycling.At this phase,crumb rubber is ground down into a clean powEPTform with nearly all steel and fiber taken off.Rubber powEPThas quite a few secondary uses from injection molding merchandise,coatings,roofing components and numerous asphaltapplications.
Rubber powEPTis generally identified in 40-seventy four microns(.forty-.74mm) in dimensions.This micron dimension metarial has the gain of being incorporated into new or eXiHu (West Lake) Dis.sting formulations for different polymers and completed products.
|
Rubber powder |
M2000 |
M1500 |
M1000 |
M500 |
|
Input solution |
Weighty obligation truck tyres to bicycle tyres |
|||
|
Input dimension |
Diameter 1800mm |
Diameter 1800mm |
Diameter 1800mm |
Diameter 1800mm |
|
Output measurement |
shred to 30-a hundred and twenty mesh rubber powder |
|||
|
Capacity |
2000kg/h |
1500kg/h |
1000kg/h |
500kg/h |
|
Total Kw |
680-760kw |
516-556kw |
347-372kw |
170-190kw |
FAQ:
Q1,Are you a factory or a investing firm?
A. We are a maker with thirty a long time manufacturing encounter in tire recycling EPT. We have export license, we can offer you the manufacturing facility rates.
Q2. Can you promise the ability as you mentioned ?
A. Definitely yes,other than that,we also offer three-5years warranty.
Q3, are you positive the ultimate rubber powEPTcan be completely thoroughly clean out of wire metal or nylon ?
A. The final powEPTpurity can reach ninety nine.9%. we have magnetic separator which can independent the wire metal from the rubber powder.
