tire recycle EPT line Crumb Rubber Reuse EPT
The EPT tire recycling EPT will be controlled by the PLC, all the components will be method inside of of EPTs, there is True ZERO Pollution. 1 labor, one engineer can work all the EPTs, no need to function the EPTs, just control the PLC. the EPTs can safeguard the EPTs, perform the EPTs and keep the EPTs perform easily.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC computerized handle method, with automated reversal control system in overload issue. Two-shaft tire crusher is EPTly created for old tires with minimal speed and large torque to decrease noise and EPT usage.
The blade of the shredEPTis manufactured of substantial good quality metal and subjected to Bodycote heat treatment to accomplish the greatest crushing functionality.The shredEPTis easy to disassemble and adjust cutter blade and suitable for tearing big, added thick and challenging supplies.The thickness range of the crushing blade is 25mm-152mm according to the tire variety,output and final product. The grinEPTcan procedure OTR tires,big truck tires,vehicle tires and so on at the velocity of one-30tons whithin one hour.
| Product | Enter measurement | Output dimension | Cappacity | Motor | Blades amount | Proportions | Weight |
| TS-800 | 800mm | 50*50mm | one-2T/h | two*22kw | 16pcs | four*two.6*3.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | 2*37kw | 20pcs | 4.8*two.8*three.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | 2*45kw | sixteen-30pcs | five*two*three.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | 2*55kw | 20-24pcs | 5.six*2*three.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | two*75kw | 20-30pcs | six*two.4*4m | 36T |
| TS-2400 | 2400mm | 100-200mm | 20-30T/h | 2*110kw | sixteen-24pcs | 7.four*3.2*five.2m | 56T |
two.Rasper
EPT tire shredding technique is created to generate up to 6 tons per hour of wire cost-free rubber mulch.This technique generates up to a 99% wire cost-free chip ranging in dimension amongst 12-25mm based on the sought after dimensions.After processing,the steel is eliminated by our magnetic separation method.At this point,the wire free rubber chips are prepared to be colored and utilized for landscaping mulch and the steel is completely ready to be baled and bought to smelters.
| Rasper | Motor | EPT | Capacity | Proportions | Weight | Slicing chamber | Closing product |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.4*one.2*two.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | 1.seven*one.7*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | seven-hundred-1T/H | 2*2*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | 1-1.5T/H | two.one*2.1*four.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | one.five-3T/H | 2*2.5*4.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*two.1*3.6m | 12400kg | 697*1562mm | 10-30mm |
3.Granulator EPT
Waste Tire Recycling Rubber Granule Producing EPT is adopting bodily recycling approach and is created to grind the rubber mulch from the rasper into little granules as fantastic as 1-6mm. The granules are screened and re-circulated until finally the desired dimensions is reached. This Fully-Automatic Tyre Recycling Line operating in regular temperature, no need to have to add any other chemicals, no air pollution to the surroundings. This is the best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Potential | three hundred-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Dimensions | one.eight*one.6*2.4m | one.8*1.nine*2.4m | two.2*two.three*3m |
| Closing solution | 1-6mm | one-6mm | 1-6mm |
4.Miller
Rubber powEPTis the closing consequence of ambient tire recycling.At this phase,crumb rubber is floor down into a clear powEPTform with almost all metal and fiber eliminated.Rubber powEPThas several secondary utilizes from injection molding items,coatings,roofing resources and various asphaltapplications.
Rubber powEPTis usually identified in forty-74 microns(.forty-.74mm) in size.This micron dimension metarial has the edge of becoming included into new or eXiHu (West Lake) Dis.sting formulations for various polymers and finished items.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter item | Large responsibility truck tyres to bicycle tyres | |||
| Input measurement | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output size | shred to 30-a hundred and twenty mesh rubber powder | |||
| Potential | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a manufacturing facility or a investing company?
A. We are a producer with thirty a long time creation knowledge in tire recycling EPT. We have export license, we can provide you the factory costs.
Q2. Can you promise the ability as you mentioned ?
A. Definitely indeed,except that,we also supply three-5years warranty.
Q3, are you certain the last rubber powEPTcan be fully thoroughly clean out of wire steel or nylon ?
A. The ultimate powEPTpurity can achieve 99.9%. we have magnetic separator which can different the wire metal from the rubber powder.
