tire recycling philippines tire recycling EPTs to rubber powder
The EPT tire recycling EPT will be controlled by the PLC, all the supplies will be procedure within of EPTs, there is Real ZERO Air pollution. 1 labor, one engineer can work all the EPTs, no need to run the EPTs, just management the PLC. the EPTs can protect the EPTs, operate the EPTs and hold the EPTs function smoothly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automated manage method, with automatic reversal manage technique in overload condition. Two-shaft tire crusher is EPTly developed for aged tires with lower velocity and high torque to decrease noise and EPT use.
The blade of the shredEPTis made of substantial good quality metal and subjected to Bodycote warmth treatment to achieve the ideal crushing performance.The shredEPTis simple to disassemble and modify cutter blade and ideal for tearing large, added thick and hard components.The thickness variety of the crushing blade is 25mm-152mm in accordance to the tire kind,output and final merchandise. The grinEPTcan approach OTR tires,massive truck tires,vehicle tires and so on at the speed of 1-30tons whithin 1 hour.
| Product | Enter measurement | Output measurement | Cappacity | Motor | Blades quantity | Dimensions | Bodyweight |
| TS-800 | 800mm | fifty*50mm | one-2T/h | 2*22kw | 16pcs | 4*two.6*3.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | 3-5T/h | 2*37kw | 20pcs | four.8*two.eight*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | 2*45kw | 16-30pcs | 5*2*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | 7-10T/h | 2*55kw | 20-24pcs | 5.six*two*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | ten-15T/h | two*75kw | twenty-30pcs | 6*two.4*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | 2*110kw | sixteen-24pcs | 7.4*three.two*5.2m | 56T |
2.Rasper
EPT tire shredding system is designed to produce up to 6 tons for every hour of wire cost-free rubber mulch.This method makes up to a 99% wire totally free chip ranging in measurement between twelve-25mm based on the sought after dimensions.Following processing,the steel is taken off by our magnetic separation program.At this level,the wire free rubber chips are all set to be colored and used for landscaping mulch and the metal is ready to be baled and marketed to smelters.
| Rasper | Motor | EPT | Ability | Dimensions | Weight | Chopping chamber | Closing solution |
| R45 | Siemens | 45KW | 300-500kg/H | one.4*1.2*two.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | one.seven*one.seven*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | seven-hundred-1T/H | 2*2*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | 1-1.5T/H | two.1*2.one*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | one.five-3T/H | two*2.5*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | three-6T/H | 6.2*2.1*three.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Creating EPT is adopting physical recycling approach and is made to grind the rubber mulch from the rasper into tiny granules as fine as one-6mm. The granules are screened and re-circulated until the preferred measurement is achieved. This Completely-Automatic Tyre Recycling Line running in regular temperature, no want to insert any other chemical compounds, no air pollution to the setting. This is the greatest way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Potential | 300-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Dimensions | one.8*1.six*two.4m | one.8*one.9*two.4m | two.two*two.3*3m |
| Final item | 1-6mm | 1-6mm | one-6mm |
4.Miller
Rubber powEPTis the final outcome of ambient tire recycling.At this phase,crumb rubber is ground down into a clean powEPTform with nearly all metal and fiber taken off.Rubber powEPThas quite a few secondary utilizes from injection molding goods,coatings,roofing supplies and numerous asphaltapplications.
Rubber powEPTis usually discovered in forty-74 microns(.40-.74mm) in size.This micron size metarial has the edge of being incorporated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and finished merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input solution | Large responsibility truck tyres to bicycle tyres | |||
| Enter dimension | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output measurement | shred to thirty-120 mesh rubber powder | |||
| Capability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Overall Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a factory or a investing company?
A. We are a producer with 30 years manufacturing experience in tire recycling EPT. We have export license, we can offer you the manufacturing unit charges.
Q2. Can you ensure the capacity as you pointed out ?
A. Absolutely yes,except that,we also supply three-5years guarantee.
Q3, are you sure the closing rubber powEPTcan be completely clear out of wire steel or nylon ?
A. The closing powEPTpurity can reach ninety nine.nine%. we have magnetic separator which can independent the wire steel from the rubber powder.
