Squander Recycling EPT Rubber PowEPTTire Miller Tire Grinder
The EPT tire recycling EPT will be controlled by the PLC, all the materials will be procedure within of EPTs, there is True ZERO Pollution. one labor, one engineer can work all the EPTs, no need to run the EPTs, just handle the PLC. the EPTs can shield the EPTs, perform the EPTs and keep the EPTs operate smoothly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automatic handle method, with automatic reversal control method in overload problem. Two-shaft tire crusher is EPTly made for previous tires with lower speed and high torque to decrease noise and EPT use.
The blade of the shredEPTis produced of substantial high quality metal and subjected to Bodycote heat treatment method to accomplish the best crushing efficiency.The shredEPTis easy to disassemble and adjust cutter blade and suited for tearing huge, further thick and hard materials.The thickness variety of the crushing blade is 25mm-152mm according to the tire type,output and closing solution. The grinEPTcan approach OTR tires,big truck tires,vehicle tires and so on at the speed of one-30tons whithin 1 hour.
| Product | Enter size | Output dimension | Cappacity | Motor | Blades quantity | Proportions | Bodyweight |
| TS-800 | 800mm | 50*50mm | 1-2T/h | 2*22kw | 16pcs | 4*two.six*3.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | two*37kw | 20pcs | four.eight*two.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | two*45kw | 16-30pcs | 5*2*three.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | 2*55kw | twenty-24pcs | five.6*two*3.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | two*75kw | twenty-30pcs | six*two.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | two*110kw | sixteen-24pcs | 7.4*3.two*five.2m | 56T |
two.Rasper
EPT tire shredding method is made to produce up to six tons per hour of wire free of charge rubber mulch.This method makes up to a 99% wire cost-free chip ranging in measurement amongst 12-25mm depending on the sought after dimension.Following processing,the metal is taken out by our magnetic separation system.At this point,the wire free rubber chips are completely ready to be colored and employed for landscaping mulch and the metal is completely ready to be baled and offered to smelters.
| Rasper | Motor | EPT | Capability | Proportions | Weight | Cutting chamber | Last product |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.four*one.two*two.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | 1.seven*one.seven*two.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | 700-1T/H | 2*two*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | 2.one*2.1*four.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | two*two.five*4.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*2.1*three.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Generating EPT is adopting actual physical recycling method and is developed to grind the rubber mulch from the rasper into modest granules as fantastic as 1-6mm. The granules are screened and re-circulated until the desired measurement is reached. This Entirely-Automated Tyre Recycling Line running in standard temperature, no want to include any other substances, no air pollution to the environment. This is the very best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Ability | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Dimensions | 1.eight*one.6*2.4m | 1.eight*1.nine*2.4m | 2.two*2.3*3m |
| Closing product | 1-6mm | one-6mm | 1-6mm |
four.Miller
Rubber powEPTis the closing result of ambient tire recycling.At this stage,crumb rubber is floor down into a clean powEPTform with virtually all metal and fiber taken out.Rubber powEPThas many secondary utilizes from injection molding items,coatings,roofing components and numerous asphaltapplications.
Rubber powEPTis normally located in forty-seventy four microns(.forty-.74mm) in dimension.This micron measurement metarial has the gain of currently being included into new or eXiHu (West Lake) Dis.sting formulations for different polymers and concluded goods.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter product | Weighty obligation truck tyres to bicycle tyres | |||
| Enter dimensions | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimension | shred to thirty-one hundred twenty mesh rubber powder | |||
| Potential | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Total Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
FAQ:
Q1,Are you a manufacturing unit or a buying and selling company?
A. We are a company with thirty a long time manufacturing experience in tire recycling EPT. We have export license, we can provide you the manufacturing unit charges.
Q2. Can you promise the capability as you talked about ?
A. Undoubtedly indeed,apart from that,we also provide 3-5years warranty.
Q3, are you sure the final rubber powEPTcan be fully cleanse out of wire metal or nylon ?
A. The final powEPTpurity can reach 99.nine%. we have magnetic separator which can different the wire steel from the rubber powder.
