Jun 12, 2017

Some of the common problems and solutions of Wallpaper
Base film from the skin
1) in the brush before the base film, the first check whether the standard wall, no powder, no floating layer
2) whether the walls have subtle cracks
3) whether the construction temperature is above 5 degrees
4) brush base film when the first road is too thick, not dry on the second brush, due to the inner and outer drying time is different, may cause skinning.
5) base film is too thick, can add water to ease. Grind the base film with sandpaper
2. glue overflow
As far as possible in the construction process through the tape to avoid glue overflow Wallpaper surface, plastic Wallpaper is relatively easy to clean, you can not apply to tape, in addition to plastic Wallpaper all the Wallpaper recommended the use of paper construction.
Wipe with a wet sponge. Suitable for surface scrubbing of Wallpaper
Take a dry towel. Applicable to the surface can not touch the water Wallpaper
With wet sponge suction. Applicable to the surface of the Wallpaper for the particles
3. There are stains at the seams
In the Wallpaper, the glue is not completely out of the accumulation in the seams, the time for a long time with the Wallpaper response. Solution: 60-80 degrees water a small bottle, add a bottle of white vinegar, and so on after the water down, rinse at the seams. (Recommended local test), the last Wallpaper in the 1-2 months effect will be better, you can get rid of 80% of the traces
4. Wallpaper shrinks Alice
Wallpaper contraction, mainly workers in the construction of the patchwork lax, resulting in the late emergence of this problem, and the construction technology of the workers. As the Wallpaper is made of wood pulp, with wood wet shrinkage shrinkage characteristics, performance is not particularly stable, after the glue will have a certain degree of expansion, in the drying process shrinkage. Although the expansion can not control, but the workers in the construction can control the shrinkage. Repair process is relatively simple, with a wet towel wet towel for 10 minutes, with a Wallpaper knife tip to pick up the Wallpaper, generally can be picked up. If the attachment of the Wallpaper surface is a metal surface, easy to make the Wallpaper after the loss of glossy black, damage the beautiful Wallpaper surface, it is not recommended operation.
5. Wallpaper moldy
1) Wallpaper moldy, usually in the Wallpaper surface will have spots,
(1) should check whether the wall water seepage.
(2) whether the glue is completely dry.
(3) in the Wallpaper, whether there is moisture and air long-standing Wallpaper, and glue from the reaction caused by mold.
(4) weather humidity.
(5) Wallpaper wet paste

2) Treatment:
(A) mold point is small, it is recommended to dip with water or detergent wipe, dry with a hair dryer.
(B) with bleach, easy to stimulate the skin and may make the Wallpaper fade, is not recommended.
(C) moldy point is necessary to replace the Wallpaper, such as wall water seepage caused by the need to completely solve this problem and then posted.
点击图标下载 App