Platinum silicone rubber for generating prosthetic entire body components tattoo/exhibition
Merchandise Description
| Use |
liquid silicone to make artificial palms can be use for tatoo apply, healthcare follow, jewelry present and so on. The Food and drug administration addition heal EPT Rubber for existence casting is nontoXiHu (West Lake) Dis.c, truly feel like genuine pores and skin and durable, good at casting ,really risk-free for XiHu (West Lake) Dis.Hu (West Lake) Dis.n.
| Description |
liquid silicone to make synthetic palms and foot for EPTttoo/exhibition is and delicate, true skin liquid silicone rubber,which is ideal for molding approach with very good strength, and tear energy and miXiHu (West Lake) Dis.ng ratio is 1:one. This is our EPT-E610
| Software |
liquid silicone to make synthetic palms and foot for EPTttoo/exhibition can also be used for creating other food quality silicone rubber goods,such as orthotics prosthetics, limb, mini infant dolls, sex toys, entire body organs, ear, nose, mask and so om
| Instruction |
comfortable liquid silicone rubber for silicone artificial hand and silicone artificial foot can not be immediately utilised for true production direction. Make sure you speak to us for specifics.
| Complex Datasheet |
| Model | EPT-E610 |
| color | Translucent |
| MiXiHu (West Lake) Dis.ng ratio(%) | 1:1 or 10:1 |
| Pot existence (mins,underneath 25 ordmC) | 20-40 |
| Curing time (hrs,below twenty five ordmC) | 4-five(hrs under 25 ordmC) |
| 20-thirty (minutes below sixty ordmC) | |
| Hardness (Shore A) | 10 plusmn2 |
| Viscosity (Right after A/B mixed,mPa.s) | 3500 plusmn1000 |
| Tensile-power (MPa) | 4. plusmn0.5 |
| Tear-energy (kN/m) | 12 plusmn5 |
| Shrinkage fee (%) | le0.1% |
| EEPTation(%) | four hundred% |
| Warm guidelines |
A.As it really is very straightforward to cuase uncure issue , pls clean up all the tools which had mixed with
condensation treatment silicone rubber to steer clear of uncure issue .
B.Do not incorporate any pigment or powder into the addition cure silicone rubber prior to screening to
stop uncure.
C.Addition treatment silicone rubber is bicomponent incXiHu (West Lake) Dis.Hu (West Lake) Dis. Component A and Component B, do not incorporate the
Component B on the container which experienced maintain Component A,the exact same for element B .
D.The miXiHu (West Lake) Dis.ng ratio (one:one, 10:1) have to in strict accordance with the ratio in situation of the altering of
hardness .
| Our companies |
1: Get to the international stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd large good quality with competitive price tag !
2: Passed the certificates incXiHu (West Lake) Dis.Hu (West Lake) Dis. the Food and drug administration, RoHS, MSDS, SGS,ISO9001:2000 !
3: Online and on-web site stick to-up service for item demonstration !
four: Free technological instruction on items use and operation instructions !
5: Free client provider to resolve complex troubles
6: Totally free mould opening technologies !
7: Any of our products with quality troubles will be replaced within 3 months soon after acquire !
| Using instruction |
Technological XiHu (West Lake) Dis.Hu (West Lake) Dis.strains
one, MiXiHu (West Lake) Dis.ng Ratio: element A: component B = 1:1/10:one
2, Deaeration the mixture in vacuum pump beneath .08 MPa for three-5 minutes. Then the mixture could be used for pouring.
3, Remember to observe that the thickness of the silicone impacts the curing time. If the silicone employed is a minor thick, then the curing time will be a tiny EPTer. The temperature also affects the curing time. When in reduce temperature, we propose buyers properly warmth the mixture to accelerate vulcanization. With temperature of eighty~100 ordmC, the silicone will remedy in 15 minutes although in twenty five ordmC room temperature, the silicone will cure about 4-five hrs.
Notes
one.The pursuing materials could hinder the curing of EPT-E610, so remember to use following the take a look at. If required, remember to clean the application places.
l Organotin compound or Condensation silicone with organotin.
l Sulphur, sulfide and sulfur rubber resources.
l Amine compounds as properly as consists of the amine materials.
l Pewters solder flux.
2. EPT-E610 should be sealed storage.
The mixture need to be used up disposably to avoid creating squander.
three. EPT-E610 beEPTs to non-unsafe items, but hold absent from mouth and eyes.
4. When it gets stratified following a period of time of storage, Please blend it evenly just before utilizing, which does not affect the efficiency.
Organization Info
|
Business Title: |
HangZhou Hong Ye Jie Engineering Co., Ltd. |
|
Company Sort: |
Manufacturer |
|
Makes: |
Hong Ye silicone |
|
Year EstabEPTd: |
1998 |
|
Factory Dimensions: |
5,000-ten,000 square meters |
|
Administration Certification: |
ISO 9000/9001/9004/19011: 2000 Others |
|
Agreement EPT: |
OEM Provider Presented |
|
Product/Support |
RTV-2 molding silicone, addition silicone, pad printing silicone rubber, life casting silicone, textile coating silicone rubber, liquid silicone rubber , guide mould silicone, LSR, trademark silicone rubber, electronic potting silicone rubber, Food and drug administration silicone, silicon oil |
