Sizzling!!Tyre Rubber PowEPTProduction Products/Squander Tire Recycling EPT
my buddy
we also have rubber tile making line
this is automobile line
the below is semi line
EPT
This creation line incXiHu (West Lake) Dis.Hu (West Lake) Dis. major EPT and accessorial tools, it is utilised for recycling scrap-tire (metal tyre and textile tyre), the ultimate merchandise is rubber powEPTor reclaimed rubber
we also have semi-automated tire recycling EPT
*six: there is three sorts of rubber crusher, you can selection the ideal one ,it is count on the output!
#nine: you donot require Granulator GrinEPTif your ultimate rubber powEPTbigger than thirty mesh. but we require it if the powEPTless than thirty mesh and the quantity of this EPT depend on the output!
3. Evaluation for output
30-40mesh: 2500-4500kg/24 hour
forty-60mesh: 2000-3500kg/24 hour
sixty-80mesh: 1500-2600kg/24 hour
XKP400 rubber crusher:
Output: 4500-6000kg/24 hour for about twenty mesh granule.
XKP450 rubber crusher:
Output :7000-12000kg/24 hour for about twenty mesh granule.
XKP560 rubber crusher:
Output : 10000-17000kg/24 hour for about twenty mesh granule.
four. XMF330 Rubber refine grinder
We give a single 12 months good quality ensure and EPT-time period technological assistance. We can also prepare your staff for free of charge. If you need, we can install and assemble the EPT in your workshop.
1.Main working approach
2.Debeader ( oil hydraulic variety)
Product: LS 1200
Capacity:twenty-forty tires/hour
Pulling power(T): 13
Max.tire diameter 1200mm
EPT(KW): 11KW
Stroke length: 1300mm
Dimension(L*W*H): three.six*.78*one.02
Bodyweight: 2500KG
3.EPT tire cutter(utilized for bigger than 1200MM tyres , if the diameter of your tyre is smaller than 1200mm, no want this )
Product :WTC1200
Capacity:3500kg/h
Motor EPT:5.5kw
Tire variety:Max 1200mm
Dimension:2080*one thousand*2130mm
four.EPT tyre shredder
| Design | ZPS-900 | ZPS-1200 |
| Creation potential | .eight-two Ton/hour | one.5-3 T/h |
| Measurement of feeding | le900 mm EPT tyre | le1200 mm EPT tyre |
| Discharging particles | le50*50mm | le60*60mm |
| Motor powder | 45 kw | a hundred and fifty five kw |
| Discharging motor | 2.two kw | 4 kw |
| Cutter rotate velocity | sixteen r/min | 31 r/min |
| Screener rotate pace | six r/min | eight r/min |
| Dimension (L*W*H) | 2.8*2.one*2.four m | 5.two*two.eight*three.5 m |
| Excess weight | nine.two T | fourteen.eight T |
Information :
Knives substance: H3 , Germany stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd, solid, warmth therapy by large frequency, some manufacturing facility only use 45# steel, the Cost is far more less costly(only one/3 of H3 ), but the life is more shorter! The daily life of the knives is the most EPTant for the shredEPTEPT.
r EPT.
5.Closing Merchandise(50x50mm tire blocks):
6.tyre crusher
| Variety | XKP-four hundred | XKP-450 | XKP-560 |
| Front roll diameter(mm) | four hundred | 450 | 560 |
| Rear roll diameter (mm) | 400(grove roller) | 450 (grove roller) | 510 (grove roller) |
| Operating duration of rolls(mm) | 600 | 650 | 800 |
| Front roll floor velocity(m/min) | seventeen.32 | 23.2 | 25.56 |
| Friction ratio | 1:1.38 | 1:one.38 | 1:1.thirty |
| Max.nip(mm) | eight | 8 | fifteen |
| Manufacturing ability(kg/h) | two hundred-300 | 600-800 | -1500 |
| Motor EPT(kw) | forty five | fifty five | seventy five |
| General dimension(mm) | 3950*1800*1780 | 4770*1846*1835 | 5064*2284*1978 |
| Excess weight(kg) | 7000 | 12000 | 18000 |
seven.Fiber separator
Capability:500-1000kg/h
Motor EPT:five.five*two+.seventy five kw
Dimension:one.five*1.5*3.four(m)
Fat:about 1.5T
| No | Identify | model | amount | EPT |
| EPT tire pre-processing , you will get lt 50*50MM rubber crumb | ||||
| 1 | Ring cutter | QQJ-20 | 1 | five.five KW |
| two | Strip cutter | QTJ-380 | 1 | five.five KW |
| three | Loop EPT | YQJ-285 | 1 | 15KW |
| 4 | Block cutter | QKJ-45 | 11KW | |
| Rubber powEPTprocessing: you will get 3-eight MM rubber powder,at the very same time, individual the fiber and metal wire | ||||
| 5 | Tyre crusher | XK560 | 1 | seventy five KW |
| 6 | Large conveyor tools | BCL-8 | 2 | 2 KW |
| seven | Modest conveyor equipment | BCL-3 | one | one.1 KW |
| eight | Huge Magnet separator | BMS22 | one | two.two KW |
| nine | Little Magnet separator | SMS-1 | 1 | 1.1 KW |
| 10 | Big Shaking display screen | BSS-eight | one | 7.5 KW |
| 11 | Tiny Shaking monitor | SSS-3 | one | 3 KW |
| 12 | Fiber separator | FS110 | one | 11 KW |
| thirteen | Fine grinder | XMF420 | 1 | 32.4 kw |
| fourteen | Circle shaking display screen | DIA600 | 1 | 2.2 kw |
